Cables, wires, ropes, chains and string lights that hang the way real ones do. Click two points, or wire a whole city in one press and let a tornado tear it.
3ds Max 2024, 2025, 2026 or 2027. One installer covers all four.
Any renderer that takes a mesh: Corona, V-Ray, Arnold, Scanline, VanguardRender.
An NVIDIA graphics card is optional. Tangles and Follow the tornado run on the GPU when there is one (about three times faster) and on the CPU otherwise, with the same result.
Install
Close every running 3ds Max. A running Max keeps the plugin file locked.
Download the installer from your account at vanguardfx.pro/panel.php and run VanguardCables_Setup_1.3.3.exe.
Tick the Max versions you use and finish.
Start Max. Open Start โบ VanguardFX โบ Vanguard Cables Demo Scene to see every object set up and labelled.
Activate your licence
Create any Vanguard Cables object and open the Licence rollout in the Modify panel.
Press Copy next to Your Hardware ID.
Sign in at vanguardfx.pro, paste the Hardware ID with your order and press Download licence.
Press Load fileโฆ in the rollout (or paste the text and press Apply licence). It works at once โ no restart. The rollout then shows the days of updates left.
Without a licence the plugin runs with visible limits: 3 cables per scene with one wire each and no string lights; a Tangle simulates 3 cables, a Wall run builds 3 wires, a city network renders 3 spans, and Follow the tornado is off. Every limited object says so in its panel.
Where it appears in Max
All objects are in Create โบ Geometry โบ VanguardFX. The three buttons can also go on any toolbar: Customize โบ Customize User Interface โบ Toolbars, category VanguardFX, then drag Wire selected, Wire City and Cables follow tornado onto a toolbar.
The four objects
Object
What it is
VanguardCable
One cable through two or more points: true catenary sag, rope, strap, chain, end fittings, parallel wires, string lights, wind.
VanguardCableRun
A loose bundle of wires clipped along walls โ round a building, along a spline or painted with a brush.
VanguardCableTangle
Hundreds of cables that never pass through each other, carried by a flow. Can be wrung and torn.
VanguardCableNet
A whole city's cabling in one node โ power, telephone, service drops, mess, trays. Made by Wire the whole city.
The ten built-in styles, from steel wire rope to heavy chain. Every one is a single VanguardCable.
Lengths are real-world: a new object is made in centimetres and converted to your scene unit, so a metre scene gets 3.5 mm wires, not metre-thick ones. Scene scale on every object grows or shrinks all its sizes together.
Vanguard Cables 1.3.3vanguardfx.pro ยท 2 / 8
Vanguard Cables ยท User guideYour first result
Chapter 2Your first result in 5 steps
A string of lights across a terrace โ the picture on the cover. Two posts (any boxes or cylinders) are all you need.
Create a cable and click its points
Create โบ Geometry โบ VanguardFX โบ VanguardCable. Click on the first post: a click on an object lands on its surface and the end will follow the object when it moves. Click the second post, then any more points. Right-click to finish.
Clicking empty space lands on the grid. Turn on Max's snaps (S) to land exactly on vertices or edges.
Give it the right sag
In the Modify panel, Sag by: Percent of span and Sag (% of span) = 6. The lowest point now sits 6 % of the span below the straight line, on a true catenary. Keep Profile: Round cable and set Thickness (radius) to 0.4 cm for a thin festoon wire.
Turn on the bulbs
Open the String lights rollout and tick String lights. Spacing30, Bulb size4, Hang below cable5. To use your own bulb model, pick it as Custom bulb โ its pivot is where it hangs.
Make them glow
In the Tools rollout press Make bulb material. It builds a Multi/Sub for the current renderer โ CoronaLightMtl in Corona, VRayLightMtl in V-Ray, a glowing Physical Material elsewhere. Brightness, Random brightness and Bulb colour now change that material live.
Render
Render with any renderer: the cable is a normal mesh with UVs along its length. For a dusk shot like this one in Corona with the physical sky, set the exposure around EV โ3.5 so the sky does not burn to white. Tick Wind sway in the Wind rollout for a gentle loop that repeats exactly every Loop (frames).
Rows of poles in one press. Select poles or buildings in any order and press Wire objects (poles, buildings)โฆ in the Tools rollout: one cable joins them nearest-to-nearest at their tops.
Vanguard Cables 1.3.3vanguardfx.pro ยท 3 / 8
Vanguard Cables ยท User guideControls ยท VanguardCable
Chapter 3 ยท Every controlVanguardCable โ the Cable rollout
The rollout as it appears in Max 2024. Lengths are shown in centimetres; they convert to your scene unit.
Control
What it does ยท when to change it
Range ยท default
Sag
Sag by
Percent of span: you set how far it hangs. Cable length: you set how long it is and the sag follows.
Percent
Sag (% of span)
Lowest point below the straight line, as % of each span. 2โ5 for power lines, 6โ12 for festoons.
0โ100 ยท 5
Length (x span)
Used with Cable length. 1.0 is bar-taut, 1.02 a light hang, 1.2 a deep loop.
Round-ness of the tube. 6 far away, 12โ16 in close-up.
3โ64 ยท 8
Segments per span
Smoothness of the curve. Capped per wire so a large count never hangs Max.
2โ1000 ยท 24
Rope strands
Strands in Twisted / Braided rope.
2โ8 ยท 3
Rope twist length
Length of one full twist of the strands.
20 cm
Chain link length
Size of one link of a Chain.
8 cm
Style
Style
Ten ready cables, from steel wire rope and manila rope to heavy chain (see page 2). A style fills in the settings and the cable's tornado strength; change anything afterwards.
Custom
Ends
End fitting
Hardware at both ends: None, Eye + thimble + ferrule, Eye + shackle, Snap hook, Turnbuckle.
None
Wall plate + eye bolt
Puts the fitting on a plate screwed to the wall.
off
Fitting size x
Scales the hardware against the cable.
0.1โ20 ยท 1
Fitting material ID
Own ID so the hardware can be metal.
3
Mapping ยท Scale
Material ID
ID of the cable itself (bulbs use 2, fittings 3).
1
Generate mapping coords.
UVs run along the cable: U along, V round.
on
U tile length
One U tile every this many units โ set it to your texture's real length.
100 cm
Scene scale x
Multiplies every size of this object at once.
0.001โ1000 ยท 1
Anchors. A point you clicked on an object belongs to that object: move or animate the object and the cable follows. Moving the cable node moves only its free points.
Vanguard Cables 1.3.3vanguardfx.pro ยท 4 / 8
Vanguard Cables ยท User guideControls ยท VanguardCable
Chapter 3 ยท Every controlWires, lights, wind and tools
Parallel wires
Wires
Wires per cable, for three-phase lines or bundles.
1โ64 ยท 1
Spacing ยท Layout
Distance between the wires; Side by side, Stacked or Grid.
30 cm ยท Side
Wire picked objects at their top
Wire objectsโฆ attaches at the top of each pole.
on
Below the top by
Lowers that point to the crossarm under the pole top.
5 cm
String lights
String lights
Hangs bulbs along the cable.
off
Spacing ยท Bulb size
Distance between bulbs (capped per wire) and size of the built-in globe.
50 ยท 4 cm
Hang below cable
Length of each bulb's drop.
5 cm
Custom bulb
Any mesh; its pivot is the hanging point.
None
Bulb material ID
ID of the bulbs.
2
Brightness levels ยท Seed
Bulbs share this many IDs of different brightness, for natural variation; Seed picks which bulb gets which.
1โ32 ยท 5
Bulbs glow ยท Brightness ยท Random brightness ยท Bulb colour
Drive the material made by Make bulb material, live.
on ยท 8 ยท 0.5
Wind & tornado
Wind sway ยท Sway amount
Every span sways gently; ends never move. Amount is how far the middle travels.
off ยท 10 cm
Loop (frames) ยท Seed
The motion repeats exactly after this many frames โ set it to the shot length. Seed gives a different motion.
60 ยท 1
Wind file (.vtw)
A VanguardTornado wind file, filled in by All cables follow the tornado.
empty
Snap when overloaded ยท Strength x
Lets the cable break; higher strength = fewer snaps.
on ยท 1
Tools
Wire the whole city
Wires every pole of the VanguardCity in the scene โ nothing needs to be selected.
All cables follow the tornado
Runs every cable in the VanguardTornado's wind. Save the scene first.
Wire objects (poles, buildings)โฆ
One cable through the selected objects, nearest to nearest.
Make bulb material ยท Reverse direction
A renderer-correct glowing Multi/Sub; flips the point order. The status line counts anchors, wires, bulbs and faces.
Vanguard Cables 1.3.3vanguardfx.pro ยท 5 / 8
Vanguard Cables ยท User guideControls ยท Wall run ยท Tangle
Chapter 3 ยท Every controlVanguardCableRun โ wiring on walls
Path
Round the walls at a height ยท Along a spline (projected onto the walls) ยท Painted with the brush (PAINT ON A SURFACE; Ctrl+Z undoes a stroke).
Walls / surfaces
Addโฆ the walls or the whole building. Move a wall and the run follows.
Height ยท Start / End at ยท Gap
Height for Round the walls (150 cm); trim 0โ1; standoff at the clips.
Style
Tidy loom, Electrician saddle run, Old building mess, Data bundle, Power + phone, Hanging under a ceiling, Twisted bundle, Site temporary power, Industrial heavy, Dense tangle.
Wires ยท Wire radius ยท Radius random
The bundle (12 ยท 0.35 cm ยท 0.3). Each wire has its own lane, so none passes through another.
Material IDs ยท Bundle
Wires use IDs 1โฆn, clips and screws the next two. Round or Flat.
Messy ยท Open between clips ยท Sag ยท Twist
How wild it looks between clips (0.6 ยท 0.6 ยท 0.6 cm ยท 0.5).
Loose ends ยท Stray wires ยท Stray sag x
Wires hanging off the end or out of the bundle.
Clips (rollout)
Saddle clip, Zip tie or None; Spacing 40 cm, Width, Thickness, Spacing random, Missing clips (0โ0.9), own clip / screw IDs.
Tornado ยท Contact passes
Play the tornado result, Wire strength x, Snaps when stretched by (0.06). 40 contact passes keep every wire clean.
Chapter 3 ยท Every controlVanguardCableTangle โ cables in a flow
Cables ยท Points ยท Length
400 ยท 64 ยท 300 cm. 96โ128 points for long cables.
Start as
Random in the box, A pile, A row (emitter), A bundle along X (for wringing).
Velocity ยท Follow the flow
The flow per second, and how hard cables follow it (2 /s).
Turbulence ยท Scale ยท Speed ยท Swirl
Noise in the flow (60 cm ยท 120 cm ยท 0.3) and rotation.
Form ยท Gravity ยท Ground
Free or Keep inside a sphere; fall; stop at the object's base.
Wring + tear
Ends Hold both / start only; Wring deg/s + axis; Pull apart; Tear when stretched by (0 = never).
Substeps ยท Iterations ยท Bend ยท Damping
4 ยท 8 ยท 0.3 ยท 0.02. Iterations 8โ12 for final frames.
Live ยท SIMULATE ยท GPU
Live solves as you scrub; SIMULATE bakes the range (ESC stops); CUDA when present.
150 cables in turbulence, solved Live.
Vanguard Cables 1.3.3vanguardfx.pro ยท 6 / 8
Vanguard Cables ยท User guideCity network ยท Recipes
Chapter 3 ยท Every controlVanguardCableNet โ a whole city
Press Wire the whole city with a VanguardCity in the scene (Poles on, City 2.1.23 or later). Five nodes appear on the layer VanguardCables: Cables_Power (ID 10), Cables_Telephone (11), Cables_ServiceDrops (12), Cables_Messy (13), Cables_Trays (14). City's own simple wires switch off.
Segments ยท Sides ยท Thickness x ยท Sag x
The render shape of every span at once (12 ยท 6 ยท 1 ยท 1).
Show as ยท Display % ยท Display max spans
Dots (lightest), Lines or Full cable in the viewport. The render always gets full cables.
Wind sway
As on a single cable, for the whole layer.
Snaps when stretched by
0.005 (0.5 %). Older scenes keep the value they were saved with.
Play the tornado result
Switches between the simulated and the original cables.
Chapter 4Recipes
A terrace of festoon lights
Object
VanguardCable, posts clicked
Sag
Percent, 6
Thickness
0.4 cm ยท Sides 6
String lights
on ยท Spacing 30 ยท Bulb 4 ยท Hang 5
Glow
Brightness 8 ยท Random 0.5 ยท Make bulb material
A three-phase line down a road
Select
the poles, press Wire objectsโฆ
Style
Black coated wire rope
Sag
Percent, 3
Wires
3 ยท Spacing 60 ยท Side by side
Below the top by
20 cm
Old building wiring
Object
VanguardCableRun ยท walls added
Style
Old building mess
Path
Round the walls ยท Height 280
Then
Wires 24 ยท Missing clips 0.2 ยท Stray 0.15
A storm over a city
1
VanguardCity, Poles on
2
Wire the whole city
3
VanguardTornado in the streets, frames 0โ96
4
Save, then All cables follow the tornado
Values
Snaps when stretched by 0.005 ยท Strength 1
Measured on a 10,454-pole city (58,410 spans): wiring 4.6 s, follow 71 s, 26 cables snapped. Strength x3 gave 0 snaps.
A wrung, tearing bundle
Object
VanguardCableTangle
Start as
A bundle along X ยท Cables 150
Ends
Hold both ends
Wring
90 deg/s ยท axis X
Tear when stretched by
0.05 ยท Live on
Vanguard Cables 1.3.3vanguardfx.pro ยท 7 / 8
Vanguard Cables ยท User guideRendering ยท Troubleshooting ยท Licence
Chapter 5Rendering & export
Every object hands the renderer a normal mesh with UVs along the length and material IDs, built only at render time. Corona, V-Ray, Arnold, Scanline and VanguardRender all work with any material. To export (FBX, Alembic), use Convert to Editable Mesh on a copy or bake with Point Cache.
Masks: Object IDs 10โ14 on the city layers; Cryptomatte in Corona and V-Ray by name and material.
Material IDs split cable colours, clips, screws, bulbs and fittings. A city network's Multi/Sub: 1โ3 power, telephone, drops; 4โ6 messy colours; 7 tray metal; 8 tray cables.
Final quality: city Sides 6โ8, Segments 12โ16 (close-up street 16โ24); tangle Points 96โ128, Iterations 8โ12.
Every snap is written to <scene>_tornado\events.txt, so VanguardFire and Shatter can put a spark there.
Wall run styles side by side โ every look is a preset you can change afterwards.
Chapter 6Troubleshooting & FAQ
You see
Do this
The installer cannot replace a file
A running Max has the plugin loaded. Close every Max and run it again.
A cable is empty and says "unlicensed"
Load your licence in the Licence rollout; it takes effect at once.
Wire the whole city: "no power poles"
Turn on Poles in VanguardCity (2.1.23 or later) and press it again.
Follow the tornado: "save the scene first"
Save โ its wind and piece files go beside the scene in <scene>_tornado.
Cables move but nothing snaps
Lower Snaps when stretched by or Strength x, or move the tornado closer. A scene saved before 1.3.3 keeps the old 0.06.
Most city cables do not move
By design: only spans in wind above 6 m/s or on moving pieces are simulated, so a city takes about a minute. The rest hang still.
Poles stay standing in the tornado
The poles are part of the city mesh. Cables follow only tornado pieces or animated objects they are attached to.
The wall run says "no wall crosses that height"
Change Height or add the walls to Walls / surfaces.
A small chain link or bulb spacing looks capped
On purpose โ counts are capped per wire so Max never hangs. The status line says so.
Sky burns white in Corona
Exposure about EV โ3.5 with the physical sky.
Chapter 7Requirements & licence
3ds Max 2024โ2027 on Windows 10/11 64-bit ยท NVIDIA GPU optional (CUDA speeds up tangles and tornado follow) ยท one licence, one computer, tied to its Hardware ID; updates for the period on your licence ยท support: support@vanguardfx.pro ยท vanguardfx.pro