GPU fire, smoke and explosions for 3ds Max — live in the viewport, VDB out.
VanguardFire_Setup_1.1.3.exe from your account page and tick the Max versions you use (2024, 2025, 2026, 2027).The installer also puts this guide and six sample scenes in Program Files\VanguardFX\Fire\Samples: Campfire, Flamethrower, Spreading fire, Fire text, Ground explosion and Smoke tornado.
Select the domain and open the Modify panel. Rollouts top to bottom: Domain, Sources, Combustion, Smoke & Air, Live, Fire Look, Simulation & Cache, Outputs, Fluid & Water, Viewport & Export, then the Simulate tools and the Licence. Every number can be animated (Auto Key) — animating Fuel per second is how a fire lights up and dies down.
| Button | What it does |
|---|---|
| Preset + Apply | Loads one of the built-in looks (Candle … Ground explosion), including the box size. Ground explosion also builds its own sources. |
| Save mine | Saves the current settings as your preset (Documents\VanguardFire\presets); it appears as [my] name. |
| Restart | Restarts the Live simulation from the first frame. |
| SIMULATE | The full-quality run: cache + every output ticked in Outputs. Esc stops it. |
| Clear cache | Deletes this domain's cache files. |
| Export VDB / Preview render | Write VDB or PNG from an existing cache without simulating again. |
| Open output folder | Opens the folder with your VDB / PNG. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Size | ||
| Width (X) 0.001 - any (scene units) | 200 | Width of the box everything burns in. Leave a margin round the flames; anything that leaves the box is gone. |
| Depth (Y) 0.001 - any (scene units) | 200 | Depth of the box. |
| Height (Z) 0.001 - any (scene units) | 300 | Height of the box. Fire and smoke rise, so give it room above the source. |
| Cells on longest side (0 = max my GPU holds) 0 - 4096 | 128 | Cells along the longest side: the detail. 128 for blocking, 256-512 for finals. 0 = the most your graphics card holds (about 550 on 24 GB). |
| Boundaries | ||
| Solid floor on / off | on | The bottom of the box is a solid floor; smoke spreads along it. Off for fire in mid-air. |
| Open sides (smoke leaves) on / off | on | Smoke may leave through the sides and clean air comes in. Keep on, or smoke piles up in the box. |
| Open top on / off | on | Smoke may leave through the top. Keep on unless you want a ceiling. |
| Simulate on the GPU (CUDA) on / off | on | Simulate on an NVIDIA card. Off runs on the CPU, many times slower. |
| Fire stays in the world when the box moves on / off | on | Moving or animating the box does not drag the fire along with it. Off only if the fire should travel with the box (a torch carried by a character). |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Live | ||
| Live Off (show cache) / Follow the timeline / Run continuously | Follow the timeline | Off shows the last SIMULATE; Follow the timeline simulates as you play or scrub; Run continuously keeps running without Play. |
| Live cells on longest side 16 - 512 | 64 | Detail of the live viewport simulation. 32-64 stays smooth; it does not change the final. |
| Live substeps 1 - 8 | 1 | Live accuracy steps. Raise only if live fast motion looks broken. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Sources | ||
| Burning objects / particles objects | - | Meshes, Particle Flow, tyFlow or VanguardFluid particles that burn. |
| Emit from Volume (inside) / Surface (shell) | Volume (inside) | Volume fills the inside of the object with fuel; Surface only a shell on its skin - use it for logs, text and anything large. |
| Shell / particle radius 0 - any (scene units) | 2 | Shell thickness in Surface mode, and the radius around each particle. |
| Fuel | ||
| Fuel per second 0 - 1000 | 4 | How much fuel the sources give each second: the size of the fire. Animate it to light up or die down. |
| Source temperature (K) 300 - 4000 | 1100 | Temperature of what comes out. 1000-1200 K for wood, 1500+ for explosions. |
| Cold smoke per second 0 - 1000 | 0 | Cold smoke that does not burn: chimneys, steam, dust clouds. |
| Motion | ||
| Outflow speed up (m/s) -100 - 100 | 1 | Speed the gas leaves the source. Raise it for jets and explosions; negative sucks in. |
| Outflow strength 0 - 1 | 0.3 | How hard that speed is forced (0 = only a nudge, 1 = exactly that speed). |
| Flicker 0 - 1 | 0.5 | Breaks the source into living, flickering patches. 0.5-0.9 looks natural. |
| Catches fire | ||
| Objects that catch fire objects | - | Objects that are not burning yet but catch fire when the flames reach them, then burn for Burns for seconds. Spreading fire, HairFx fur. |
| Fuel while burning 0 - 1000 | 4 | Fuel an object gives while it burns. |
| Burns for (s) 0 - 10000 | 8 | How long a caught object keeps burning. |
| Motion | ||
| Push Straight up / Along each source's Z (nozzle) / Particle velocity | Straight up | Straight up; Along each source's Z for a flamethrower or a gas leak; Particle velocity for particles. |
| Inherit object motion 0 - 5 | 1 | A moving source drags its flames with it (a swung torch, a falling burning object). |
| Tornado events | ||
| Events file (empty = | empty | Fire from Vanguard Tornado: sparks and impacts it recorded light fires here. Empty finds it next to the scene; none switches it off. |
| Minimum energy 0 - any | 1 | Ignore weaker impacts. |
| Fire radius 0 - any (scene units) | 10 | Size of the fire an impact starts. |
| Impact fire burns for (s) 0 - 10000 | 3 | How long an impact fire burns. |
| Positions in Scene units / Metres | Scene units | Units of the events file. Tornado writes metres and says so; leave on Scene units otherwise. |
| Sources | ||
| Dust sources (smoke, saved as dust) objects | - | Objects that only throw dust (no fuel, no heat). Saved as a separate dust grid, so it can get its own colour at render. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Burn | ||
| Ignition temperature (K) 300 - 3000 | 550 | Fuel above this temperature burns. Lower = catches easier. |
| Burn rate (1/s) 0 - 100 | 6 | How fast fuel is used up. High = short, bright flames; low = long, lazy flames. |
| Heat release 0 - 20 | 2.5 | Heat given by burning: hotter, faster rising fire. |
| Smoke from burning 0 - 10 | 0.6 | Smoke made by burning. 0.05 candle, 0.3 campfire, 1.5+ oil fire. |
| Gas expansion 0 - 10 | 0.6 | Burning gas pushes outward. High values make fireballs bloom. |
| Motion | ||
| Buoyancy -20 - 50 | 2 | How strongly hot gas rises. |
| Cooling (1/s) 0 - 50 | 1.2 | How fast the gas cools: high = short flames that turn to smoke quickly. |
| Turbulence (vorticity) 0 - 50 | 4 | Keeps the small swirls alive: more curls and billows. 4-10 typical, up to 15 for explosions. |
| Flame tongues (m/s2) 0 - 500 | 0 | Extra random push that tears the flame into tongues. 0 off, 20-40 for a lively fire. |
| Tongue size (m) 0.01 - 100 | 0.25 | Size of those tongues in metres. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Smoke | ||
| Smoke weight -5 - 5 | 0.05 | Positive = smoke sinks a little as it cools; negative = keeps rising. |
| Smoke fades (1/s) 0 - 20 | 0.15 | How fast smoke fades away. 0.05 lingers for ages, 2 vanishes quickly. |
| Wind | ||
| Wind X (m/s) -100 - 100 | 0 | Constant wind along X. |
| Wind Y (m/s) -100 - 100 | 0 | Constant wind along Y. |
| Wind Z (m/s) -100 - 100 | 0 | Constant wind along Z. |
| Wind grip (1/s) 0 - 50 | 0 | How quickly the air takes the wind's speed. 0 = wind off; 0.5 gentle; 5 locks everything to the wind. |
| Obstacles | ||
| Colliders objects | - | Objects the fire and smoke flow around (walls, logs, letters). They may move. |
| Forces | ||
| Max force fields (Wind, Gravity...) objects | - | Max space warps (Wind, Gravity, Vortex, Vanguard Tornado wind) that push the gas. |
These shape the built-in preview render and what VanguardRender reads. They do not change the simulation.
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Fire | ||
| Fire brightness 0 - 100 | 1 | Brightness of the flames in the preview render and the Render bridge. |
| Fire tint colour | RGB 255 255 255 | Multiplies the flame colour. Leave white for real fire. |
| Colour temperature x 0.2 - 4 | 1 | Shifts the flame colour: below 1 redder, above 1 whiter/hotter. |
| Glow on smoke 0 - 20 | 1 | How much the fire lights its own smoke from inside. |
| Smoke | ||
| Smoke colour colour | RGB 76 76 82 | Colour of the smoke in the preview. |
| Smoke density 0 - 200 | 3 | How thick the smoke looks at render. |
| Light | ||
| Key light 0 - 20 | 1 | Strength of the key light in the preview. |
| Self shadow 0 - 1 | 1 | Self shadowing in the smoke: 1 = full, deep billows. |
| Sky light 0 - 20 | 1 | Soft fill light from the sky. |
| Exposure (stops) -10 - 10 | 0 | Preview exposure in stops. |
| Detail | ||
| Fine detail (render) 0 - 4 | 0.4 | Adds fine noise to the rendered smoke edges. |
| Detail size (cells) 0.1 - 10 | 1 | Size of that noise in cells. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Viewport | ||
| Show Fire + smoke / Fire only / Smoke only / Temperature / Box only | Fire + smoke | What the viewport draws: fire and smoke, one of them, temperature, or only the box. |
| Max points 1000 - any | 300000 | Point budget of the viewport display. Lower if the viewport is slow. |
| Display density 0.01 - 100 | 1 | Makes the viewport display thicker or thinner (display only). |
| Export | ||
| VDB folder folder | empty | Older separate VDB folder (Export VDB button). Usually leave empty and use the Output folder. |
| Write velocity (motion blur) on / off | off | Add velocity grids vel.x/y/z for motion blur. |
| Viewport | ||
| Show domain box on / off | on | Draw the box in the viewport. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Range | ||
| Start frame -100000 - 100000 | 0 | First frame SIMULATE computes. |
| End frame -100000 - 100000 | 100 | Last frame SIMULATE computes. |
| Quality | ||
| Substeps per frame 1 - 16 | 1 | Steps per frame. 1-2 for calm fire, 3-6 for fast explosions or jets (no streaks or holes). |
| Time scale 0.01 - 10 | 1 | Below 1 = slow motion, above 1 = faster. |
| Pressure Fast / Balanced / Accurate | Balanced | Fast for tests, Balanced for most, Accurate for big explosions where the shape must be exactly round. |
| Cache | ||
| Cache folder folder | empty | Folder for the per-frame cache (.vfc). Empty = next to the scene. Can be deleted any time; SIMULATE rebuilds it. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Outputs | ||
| Write VDB while simulating on / off | on | Write an OpenVDB file each frame during SIMULATE. |
| VDB layers | ||
| density (smoke) on / off | on | Grid density (smoke). |
| temperature (Kelvin) on / off | on | Grid temperature in Kelvin - drives fire colour in most renderers. |
| flame on / off | on | Grid flame (0-1): the visible fire, easiest for emission. |
| fuel on / off | off | Grid fuel. Rarely needed. |
| Outputs | ||
| Write PRT particles (Krakatoa / Frost) on / off | off | Also write PRT particle files for Krakatoa or Frost. |
| PRT particles per cell 1 - 8 | 1 | Particles per cell in the PRT. |
| Render preview images (PNG) on / off | off | Render a PNG of every frame with the built-in fire renderer while simulating - instant dailies. |
| Preview width 64 - 8192 | 1280 | Width of those PNGs; height follows the render settings. |
| Output folder folder | empty | Folder for VDB, PRT and PNG. Empty = next to the scene. |
| Render from camera (empty = viewport) objects | - | Camera for the preview images; empty uses the active viewport. |
| Detail | ||
| Flow displacement (VDB + preview) 0 - 10 | 0 | Fine detail that rolls with the smoke, added to the VDB and preview (not the cache). 2-4 for crisp billow edges; 0 off. |
| Displacement size (cells) 1 - 64 | 4 | Size of that detail in cells. 3 sharp, 8 broad. |
| Control / range | Default | What it does, when to change it |
|---|---|---|
| Water puts fire out | ||
| Water (VanguardFluid / particles / meshes) objects | - | Water that puts the fire out: VanguardFluid, particles or meshes. |
| Quench strength (1/s) 0 - 100 | 8 | How fast water kills the fire. |
| Steam (smoke) from quenching 0 - 10 | 0.5 | Steam (white smoke) made when water hits fire. |
| Particle radius 0 - any (scene units) | 2 | Radius around each water particle. |
| Water is also an obstacle (fire flows around it) on / off | on | The water is also an obstacle the flames flow around. |
The first four are built-in presets (Simulate rollout › Preset › Apply); the values are listed so you can start from them and tune. The fifth is the Fire text sample scene. Anything not listed stays at its default.
Box 0.12 × 0.12 × 0.36 m, 96 cells.
Fuel 2.5 · Source 1000 K · Burn rate 10 · Heat 1.8 · Smoke from burning 0.05 · Expansion 0.3 · Buoyancy 3 · Cooling 3 · Turbulence (vorticity) 1 · Smoke fades 2 · Outflow 0.2 · Flicker 0.3
Box 2 × 2 × 3 m, 128–256 cells. Emit from Surface, logs as sources.
Fuel 6 · Source 1200 K · Burn rate 5 · Heat 3 · Smoke 0.3 · Expansion 0.8 · Buoyancy 2.5 · Cooling 1 · Vorticity 6 · Smoke fades 0.6 · Outflow 1 · Flicker 0.7
Box 3 × 3 × 8 m, 128 cells. No fire, only cold smoke carried by wind.
Fuel 0 · Cold smoke 5 · Source 450 K · Buoyancy 1 · Cooling 0.3 · Vorticity 3 · Smoke fades 0.05 · Outflow 2 / strength 0.5 · Wind X 1.5 · Wind grip 0.5
Box 44 × 44 × 32 m, resolution 0 (all your card holds). The preset builds the burst, debris trails and dust ring itself.
Fuel 18 · Source 1700 K · Burn rate 5 · Heat 4 · Smoke 2.5 · Expansion 1.5 · Buoyancy 2.2 · Cooling 0.7 · Vorticity 14 · Flame tongues 30 / 3 m · Smoke fades 0.04 · Outflow 4 · Flicker 0.9 · Substeps 6 · Flow displacement 4 / 3 · VDB velocity on
Extruded text 5 m high as both source and collider, Emit from Surface, shell 0.18 m. Box text width + 8 m × 12 × 20 m, 448 cells, Substeps 3.
Fuel animated 0 (frame 8) → 9 (frame 34) → 3.5 (frame 60) · Heat 3 · Burn rate 9 · Expansion 0.5 · Buoyancy 2 · Cooling 3.2 (keeps the letters readable) · Smoke from burning 0.15 · Smoke fades 1.6 · Vorticity 10 · Flame tongues 25 / 0.6 m · Flicker 0.8 · Flow displacement 3 / 3
Tick Outputs › Write VDB while simulating and the layers you need. SIMULATE writes <name>_0000.vdb per frame into the Output folder. Load the sequence in your renderer's volume object:
| Renderer | Load with | Map |
|---|---|---|
| V-Ray | VRayVolumeGrid | Smoke ← density, Fire ← temperature (or flame) |
| Arnold | Arnold Volume + Standard Volume | density → density, temperature → Blackbody |
| Corona | CoronaVolumeGrid | density → absorption/scatter, temperature → emission |
| Redshift | RS Volume | density / temperature / flame |
| Krakatoa, Frost | PRT files (Outputs › Write PRT) | Density, Temperature, Emission |
Grid names: density (smoke), temperature (Kelvin), flame (0–1), fuel, dust, and vel.x/vel.y/vel.z for motion blur. VDB is written in metres-correct scene units, so it lines up with the domain.
temperature with a blackbody, range 800–1800 K; or by flame 0–1 with an orange–yellow ramp.Render preview images (PNG) renders every frame with Vanguard Fire's own GPU fire renderer from the chosen camera — dailies in seconds, alpha included, ready to comp over a plate. VanguardRender reads the fire directly, no VDB needed.
Tick Open sides and Open top, raise Smoke fades, or make the box bigger. Smoke that cannot leave has nowhere to go.
Lower Cooling and Burn rate, raise Fuel per second.
Raise Cells on longest side (or set 0), add Flame tongues 20–40 and vorticity 6–10, and Flow displacement 2–4 for the export.
Raise Substeps to 3–6. Do not let sources jump: animate them shrinking away instead of teleporting.
Use Surface emission with a thin shell, add the object as a collider, and lower the fuel after it has caught.
Check that Simulate on the GPU is on and another program is not using the card (a render in another Max shares it). The status line shows the time of each stage per frame.
No licence on this computer. See Activate on page 2.
Close every 3ds Max and run it again.
Those are caches. Delete them freely (or Clear cache); SIMULATE rebuilds them. Keep the VDBs you render from.
The samples open in light Live mode. Press Play, or raise the resolution and press SIMULATE. Smoke tornado needs Vanguard Tornado installed.
One licence, one computer. The licence is tied to the Hardware ID. Changing computer? Contact us and we move it.
Support: support@vanguardfx.pro · vanguardfx.pro