VANGUARDFX/Specialist plugins/Vanguard Shatter - User GuidePlugin page
A concrete column hit by a wrecking ball, breaking into pieces
VANGUARDFX

Vanguard Shatter

Break, collapse and crumble anything in 3ds Max — glass, concrete, wood, sand, cloth — simulated on the GPU.
User guide · version 1.7.83ds Max 2024 – 2027vanguardfx.pro

01Getting started

Shatter is one modifier. Put it on any closed mesh and the mesh is cut into pieces at once; press SIMULATE and the pieces fall, collide and settle — or stay glued until something hits them.

Install

Close every copy of 3ds Max and run VanguardShatter_Setup_1.7.8.exe. Tick the Max versions you use (2024, 2025, 2026, 2027 — only installed ones are offered). The installer puts:

VanguardShatter.dlointo each Max's Plugins folder
PhysXGpu_64.dllNVIDIA's GPU physics, into Program Files\VanguardFX\PhysX
Guide, sample scenesProgram Files\VanguardFX\Shatter

Start Max. To update, run the newer installer the same way; scenes keep every setting.

Activate

  1. Add Shatter to any object (below) and open the Licence rollout. Press Copy next to your Hardware ID.
  2. Sign in at vanguardfx.pro, open My Licences, give that Hardware ID and press Download licence file.
  3. Back in Max press Load file..., choose the file, press APPLY LICENCE. No restart.
The site also shows a short licence key. That is not the file: if you paste the key, the rollout tells you so and leaves your licence alone.

Where it appears in Max

Select an object → Modify panel → Modifier List → Vanguard Shatter. It is a modifier, so you will not find it in the Create panel.

Its rollouts, top to bottom:

Shatter - Toolspresets, SIMULATE, cache, bake
Shatter - Fracturehow it breaks
Glue & Impactwhat holds it, what hits it
Simulationrange, material, world, wind, water
Debris & Dustchips and dust at the cracks
Cache & Displaycache file, viewport
Licence, About / Helpactivation, this guide

Everything the buttons do is also in MAXScript as shatterOps.* (simulate, clearSim, saveCache, loadCache, bake, info, simulateMany, setupForTornado, setupCityParts).

The column preset: a 400-piece concrete column hit at a third of its height.

Without a licence

Everything works on up to 50 pieces per object, so you can try every feature. Saving the cache and baking need a licence.

02Your first result in 5 steps

A concrete column, a wrecking ball, five minutes. The same steps work for a window, a wall or a wooden plank.

  1. Make the object and add Shatter

    Create a Box 0.6 × 0.6 × 3 m standing on the ground (any closed mesh works: a column, a wall, a pane, a statue). Modify → Modifier List → Vanguard Shatter. It is cut into 100 pieces at once.

  2. Start from a preset

    In Shatter - Tools → Start from, choose Concrete column - collapse and press Apply. Pattern, piece count, glue, density and friction are now set for concrete. Tick Colour each piece (Fracture → Preview) to see the cut, then untick it.

  3. Add what hits it

    Make a sphere of about 0.8 m and animate it swinging or flying into the column at a third of its height, between frames 0 and 20. In Glue & Impact → Impact objects press Add and pick the sphere.

  4. Simulate

    Set Simulation → Range to 0 – 100 and press SIMULATE — or simply press Play: with Simulate while the timeline plays on, it simulates as it plays. The column stands still until the ball reaches it, cracks where it was hit, and what loses its support comes down.

  5. Keep it and render

    Pick a file with File... and press Save cache; the scene reloads it next time. Render with any renderer straight from the modifier, or press Bake to keyframed meshes to hand the result to another scene or program.

Not happy with where it broke? Change Seed for a new cut, Glue strength for how far the damage spreads, or the ball's speed. Every change re-simulates by itself on the next Play.

03Every control explained

The panel from top to bottom. Each rollout below shows the controls as Max lists them, with the default, the range and when to change it. Distances marked “scene units” follow your Max units; everything else is in metres, kilograms and seconds.

Shatter - Tools

ControlWhat it does
Start from + ApplyNine presets: glass pane hit by a ball, concrete column collapse, brick/stone wall, wooden plank, impact crater, wet sand (fast and final), snow, soft body. Apply sets the values listed in section 04; you can change anything afterwards (Ctrl+Z undoes it).
SIMULATERuns the simulation over the range. With several Shatter objects selected they are simulated together and hit each other. A progress bar can be cancelled.
ClearThrows the simulation away; the object is intact again.
Wind...Chooses a Vanguard Tornado wind file (.vtw).
Save cache / Load cache / File...Writes or reads the .vshc cache (every frame's pieces, chips and dust). A cache only loads onto the same cut.
Bake to keyframed meshesOne mesh per piece with position and rotation keys, for any renderer, Alembic export or another program.
Status linesThe last result, piece and bond counts, and the licence state.
– Shatter - Tools
Start from
Glass pane - hit by a ballApply
Simulation
SIMULATEClearWind...
Cache & bake
Save cacheLoad cacheFile...
Bake to keyframed meshes

Shatter - Fracture

How the object is cut, before anything moves. Changing anything here re-cuts the object.

ControlDefault · rangeWhat it does, when to change it
Pattern
PatternVoronoi - uniformHow the object is cut. Uniform: even pieces (concrete, stone). Radial: fine at the Impact helper, coarse away from it (craters, a hit wall). Clustered: a few crushed zones. Glass: radial cracks plus rings (panes). Wood: long splinters along the grain. Shell: thin slabs for single-sided walls, roofs and floors (City buildings).
Pieces1001 – 5,000,000Number of pieces. 100–600 for a hero object, thousands for a facade. Unlicensed: capped at 50.
Seed10 – 999,999Changes the random layout of the cut without changing anything else. Try a few until the cracks read well.
Cut withShatterShatter (default, fastest, any GPU). NVIDIA Blast Voronoi or noisy slicing: rougher, natural faces; slower to cut.
Radial focus0.60 – 1Radial only. 0 = even, 1 = almost every piece at the impact.
Clusters61 – 1000Clustered only: how many crushed zones.
Cluster spread0.120.01 – 1Clustered only: size of each zone as a fraction of the object.
Impact point
Impact helper—Any helper or object. Radial and Glass concentrate the pieces around it; the Push also starts here.
Glue clusters (chunks)
ChunksNoneGlues pieces into bigger chunks that break off first. By size, finer near the impact, or two levels (big chunks that later split into medium ones). Use it so a wall does not crumble into identical pebbles.
Chunk size (m)0.50.01 – 100Chunk size in metres.
Glue inside a chunk x41 – 100How much stronger the glue inside a chunk is than between chunks.
Preview (before SIMULATE)
Pull pieces apart00 – 3Preview only: pushes the pieces apart so you can judge the cut. Does not affect the simulation.
Colour each pieceoffPreview only: each piece (or chunk) its own colour.
Glass
Rings71 – 60Glass: number of rings round the impact.
Rings packed at impact1.70.3 – 4Glass: above 1 packs the rings near the impact.
Irregularity0.250 – 1Glass: 0 = perfect spider-web, 1 = irregular.
Wood
Splinter length x61 – 40Wood: how much longer than wide a splinter is.
Grain alongLongest sideWood: direction of the grain.
Interior
Inside material ID21 – 1000Material ID given to the new broken faces. Put a Multi/Sub material on the object and give this ID a broken-concrete or frosted-glass look.
Inside UV tiling10.0001 – 1,000,000Tiling of the UVs on the broken faces.
Broken faces rough (concrete)00 – 1Makes broken faces rough instead of flat. 0.3–0.6 for concrete; leave 0 for glass.
City glass
City glass: break only the windows near the impactoffPut Shatter on a whole Vanguard City object: only the windows within the push radius of the Impact helper break, the rest of the city is untouched.
Glass material IDs13,14Material IDs that count as glass. City uses 13 and 14.
Pane thickness10.001 – 100,000 (scene units)Thickness of the window panes.
Shards per m2401 – 2000Shards per square metre of glass.
Shell (City buildings)
Piece size (m)20.02 – 100Shell: target piece size in metres.
Wall thickness (m)0.250.005 – 10Shell: the thickness given to single-sided walls.
Crack wave (peridynamics)
Blow at impact (m/s, 0 = off)00 – 2000A crack wave that runs through the material from the impact before anything moves (peridynamics, GPU). Speed of the blow in m/s; 0 = off.
MaterialGlassHow the wave cracks: glass, concrete or stone.
Wave particles20,000500 – 2,000,000Resolution of the wave. More = finer cracks, slower.
Sand / snow / soft (MPM)
MPM instead of piecesoffThe object becomes sand, snow or a soft body instead of rigid pieces.
MaterialSand / soil / rubbleSand / soil / rubble, snow, or soft body (jelly, rubber).
DetailUse Particle spacingHow many particles, instead of a spacing: Draft 0.5 million, Normal 2 million (a new modifier starts here), High 8, Very high 32, or As many as the computer holds (what fits on your graphics card). The spacing follows from the object’s volume. Shots made before 1.7.8 open on Use Particle spacing.
Particle spacing (m)0.030.002 – 10Distance between particles, used when Detail is Use Particle spacing (typing a spacing switches Detail to it). Halving it gives 8× the particles: 3–4 cm to block out, 1.5 cm for the final.
Stiffness (kPa)3501 – 10,000,000Stiffness. Jelly 40, snow 140, sand 350.
Friction angle (deg)300 – 60Angle a sand pile settles at.
Cohesion (0 dry .. 1 clay)00 – 10 dry sand, 0.5 wet sand that holds a tower, 1 clay.
ShowSurface (render)Surface (for rendering), Particles, Points (fastest viewport), Surface from particles (never passes through itself), or Chunks and grains: every piece still in one piece gets its own surface, broken material becomes lumps and grains of mixed sizes — the look of a Houdini MPM render.
EngineShatter MPM (all touch)Shatter MPM: runs everywhere, several objects push on each other. PhysX 5.6 GPU: real FEM soft bodies with self-collision and PBD grains; NVIDIA GPU only.
Chunks (clusters)
Chunk size (m)0.250.02 – 20Size of the clusters the material is divided into (like Houdini’s Cluster Points). Each cluster gets its own stiffness, density and strength, so the material breaks in chunks of about this size.
Chunk variety (stiffness, density, strength)0.60 – 10 = every cluster the same; 0.6 = hard heavy chunks next to soft light ones (stiffness over a factor of about 4, density ±15 %). Snow and soil look chunky instead of uniform.
Road / slab over soil (MPM)
Top layer: a slab over the filloffMakes the top of the filled object a separate slab: an asphalt road, a concrete floor or a frozen crust over the soil below it. Needs Material: Sand / soil.
SlabAsphaltAsphalt (cracks radially, breaks into plates), Concrete slab (stiffer, more brittle), Frozen crust / cemented soil (softer, crumbles).
Slab thickness (m)0.080.005 – 5How deep the slab is, measured down from the top of the object everywhere (works on slopes and mounds too).
Slab strength x10.05 – 20Multiplier on the slab's strength. Below 1 cracks wider and further from the hit, above 1 only right under it.
Crack spacing / chunk size (m)0.350.02 – 20Typical size of the chunks the slab breaks into: the cracks follow weak seams this far apart.
Crack irregularity0.850 – 0.950 = even strength everywhere (cracks wander), 0.85 = clear seams, chunks with sharp edges.
Soil breaks in lumps (0 = loose)0.50 – 0.95Cohesive soil (Cohesion above 0) breaks in lumps that stay stuck together instead of pouring like sand. 0 = loose.
Particle display (MPM / cloth)
ColourObject colourColour the particles by object colour, speed, height, direction of travel, or cracks (intact white, broken red).
Red at (m/s)50.01 – 1000Speed shown as full red.
Particle size x10.05 – 20Viewport size of points.
Cloth (PhysX GPU)
PhysX cloth instead of piecesoffThe object becomes PhysX cloth: flags, awnings, curtains, tablecloths. NVIDIA GPU only.
Stretch stiffness (kPa)50,0001 – 10,000,000Stretch stiffness. The default barely stretches, like canvas.
Bend (0 silk .. 1 canvas)0.40 – 10 drapes like silk, 1 stands like canvas.
Thickness (mm)10.05 – 50Thickness; also the gap kept from colliders.
Mass (kg, 0 = from density)00 – 100,000Total mass. 0 = from Density.
PinnedVanguardClothPin, else selected vertsWhat holds it: Vanguard City's VanguardClothPin vertices (else your selected vertices), the selected vertices, or nothing.
Tornado wind drag x10 – 100Push from a Tornado wind file.
Fluid water drag x10 – 100Push from Vanguard Fluid water.
Sim edge (m, 0 = auto)00 – 100Simulation edge length. 0 = automatic. Smaller = finer folds, slower.
– Shatter - Fracture
Pattern
PatternVoronoi - uniform
Pieces100
Seed1
Cut withShatter
Radial focus0.6
Clusters6
Cluster spread0.12
Impact point
Impact helperPick / Add
Glue clusters (chunks)
ChunksNone
Chunk size (m)0.5
Glue inside a chunk x4
Preview (before SIMULATE)
Pull pieces apart0
Colour each piece
Glass
Rings7
Rings packed at impact1.7
Irregularity0.25
Wood
Splinter length x6
Grain alongLongest side
Interior
Inside material ID2
Inside UV tiling1
Broken faces rough (concrete)0
City glass
City glass: break only the windows near the impact
Glass material IDs13,14
Pane thickness1
Shards per m240
Shell (City buildings)
Piece size (m)2
Wall thickness (m)0.25
Crack wave (peridynamics)
Blow at impact (m/s, 0 = off)0
MaterialGlass
Wave particles20,000
Sand / snow / soft (MPM)
MPM instead of pieces
MaterialSand / soil / rubble
DetailUse Particle spacing
Particle spacing (m)0.03
Stiffness (kPa)350
Friction angle (deg)30
Cohesion (0 dry .. 1 clay)0
ShowSurface (render)
EngineShatter MPM (all touch)
Chunks (clusters)
Chunk size (m)0.25
Chunk variety (stiffness, density, strength)0.6
Road / slab over soil (MPM)
Top layer: a slab over the fill
SlabAsphalt
Slab thickness (m)0.08
Slab strength x1
Crack spacing / chunk size (m)0.35
Crack irregularity0.85
Soil breaks in lumps (0 = loose)0.5
Particle display (MPM / cloth)
ColourObject colour
Red at (m/s)5
Particle size x1
Cloth (PhysX GPU)
PhysX cloth instead of pieces
Stretch stiffness (kPa)50,000
Bend (0 silk .. 1 canvas)0.4
Thickness (mm)1
Mass (kg, 0 = from density)0
PinnedVanguardClothPin, else selected verts
Tornado wind drag x1
Fluid water drag x1
Sim edge (m, 0 = auto)0

Glue & Impact

What holds the pieces together, and what breaks them.

ControlDefault · rangeWhat it does, when to change it
Glue
Glue strength (kPa)1500 – 10,000,000How hard the pieces stick together. Glass 100, wall 80, concrete 150–250, wood 300. Lower = breaks more and further from the hit.
Glue x (animate to 0 = break)10 – 100Multiplier on the glue. Animate it to 0 to make the object fall apart by itself at a chosen frame, with nothing hitting it.
Pieces hold until hitonOn: the object stands perfectly still until something reaches it. Off: everything falls from frame one.
Pieces on the ground hold the rest uponPieces touching the ground carry the rest. Whatever loses its path to the ground falls. On for walls and columns.
Edges held by a frame (glass, walls)offPieces at the border are held as if in a frame. On for window panes and walls between columns.
Rebar (steel in concrete)
Steel holds cracks (MPa, 0 = off)00 – 30Steel inside concrete, in MPa. 0 = off. 5–15: cracked concrete hangs on its steel and bends instead of falling apart.
Bends before stiff (deg)251 – 170How far the steel bends before it gets stiff.
Sway damping (lower = more sway)10 – 2Lower lets the hanging pieces sway more.
Steel bars inside (visible)offBuilds visible steel bars and ties inside the pieces; rusty stubs show where it breaks.
Bars per side32 – 12Visible bars per side of a column.
Bar diameter (mm)164 – 60Bar diameter.
Cover (m)0.040 – 1Concrete cover between the bar and the surface.
Ties every (m)0.20.05 – 2Spacing of the ties.
Bar material ID31 – 1000Material ID of the bars.
City columns (cityExportStructure .txt)—A Vanguard City structure file (cityExportStructure). The steel then follows the building's real columns.
Column size (m)0.40.05 – 5Column size used with the City file.
Impact objects
Hit by / collide with—Everything that hits the object: a ball, a car, a wrecking ball, any animated mesh. Press Add and pick. Do not add a Tornado object here, use its wind file.
Collide asExact shape (SDF: bowls, hollow)Exact shape: pieces can fall into bowls and stay inside hollow objects. Convex hull: faster, fine for solid objects.
Push (force)
Push at frame0-100,000 – 100,000Frame of a blast at the Impact helper (no object needed).
Push speed (m/s)00 – 1000Speed the push gives to the pieces it reaches. 0 = no push.
Push radius1000 – 10,000,000 (scene units)Reach of the push, in scene units.
– Glue & Impact
Glue
Glue strength (kPa)150
Glue x (animate to 0 = break)1
Pieces hold until hit
Pieces on the ground hold the rest up
Edges held by a frame (glass, walls)
Rebar (steel in concrete)
Steel holds cracks (MPa, 0 = off)0
Bends before stiff (deg)25
Sway damping (lower = more sway)1
Steel bars inside (visible)
Bars per side3
Bar diameter (mm)16
Cover (m)0.04
Ties every (m)0.2
Bar material ID3
City columns (cityExportStructure .txt)
Column size (m)0.4
Impact objects
Hit by / collide withPick / Add
Collide asExact shape (SDF: bowls, hollow)
Push (force)
Push at frame0
Push speed (m/s)0
Push radius100
Rebar: the cracked column hangs on its steel; visible bars and rusty stubs where they broke.

Simulation

The range, the material, the world, and the outside forces: Vanguard Tornado wind and Vanguard Fluid water.

ControlDefault · rangeWhat it does, when to change it
Range
Start frame0-100,000 – 100,000First simulated frame. Before it the object is intact.
End frame100-100,000 – 100,000Last simulated frame.
Simulate while the timeline playsonPress Play and it simulates as the timeline plays, like tyFlow. Frames already done play from memory; a change starts again from the start frame.
SIMULATE stops at the current frameonSIMULATE computes up to the frame you are on, not to the end. Handy for blocking out a long shot.
Material
Density (kg/m3)24001 – 100,000kg/m³. Concrete 2400, glass 2500, brick 2000, wood 600, sand 1700, snow 400.
Friction0.50 – 2How much pieces grip the ground and each other. 0.3 glass, 0.7 rubble.
Bounce0.20 – 0.95Restitution. Keep it low (0.05–0.25); real debris barely bounces.
World
Gravity (m/s2)9.81-100 – 100m/s². Lower it for slow motion that keeps the right look.
Ground planeonAn infinite ground plane.
Ground height0-10,000,000 – 10,000,000 (scene units)Height of that plane.
Collide with City buildingsonPieces land on Vanguard City buildings (their roofs) instead of falling through.
Solver
Substeps (0 = auto)00 – 20,0000 = automatic. Raise only if fast small pieces pass through thin objects.
Collision detail81 – 32Collision detail per piece. 6–8 is right for almost everything.
Air drag0.050 – 10Air drag. Raise slightly for very light debris.
Tornado wind
Wind (.vtw)—A Vanguard Tornado wind file (.vtw); set it with the Wind... button in Tools.
Wind drag x10 – 100Multiplier on the wind's push.
Break at x own peak wind0.60 – 1Glue lets go when the wind reaches this fraction of the strongest wind the piece will feel.
Break above (m/s)250 – 500No breaking below this wind speed.
Wind frame offset0-100,000 – 100,000Shifts the wind in time against the scene.
Tear off chunks (m, 0 = pieces)00 – 100The wind tears off chunks of this size (which then crack on impact) instead of single pieces.
Water (Vanguard Fluid)
Fluid object—A Vanguard Fluid (Liquid) object whose water pushes and floats the pieces.
Cache (.van)—Or the water cache (.van) directly.
Water push x10 – 100Multiplier on the water's push. Pieces float or sink by their own density.
Speed
ShapeAutoCollision shape of each piece. Auto picks; Box is fastest; Convex is exact.
QualityNormalSolver accuracy. Fast to block out, Normal, High for the final.
Physics onAuto (GPU from 512 pieces)Auto uses the GPU from 512 pieces. Force CPU or GPU if you need to.
– Simulation
Range
Start frame0
End frame100
Simulate while the timeline plays
SIMULATE stops at the current frame
Material
Density (kg/m3)2400
Friction0.5
Bounce0.2
World
Gravity (m/s2)9.81
Ground plane
Ground height0
Collide with City buildings
Solver
Substeps (0 = auto)0
Collision detail8
Air drag0.05
Tornado wind
Wind (.vtw)
Wind drag x1
Break at x own peak wind0.6
Break above (m/s)25
Wind frame offset0
Tear off chunks (m, 0 = pieces)0
Water (Vanguard Fluid)
Fluid objectPick / Add
Cache (.van)
Water push x1
Speed
ShapeAuto
QualityNormal
Physics onAuto (GPU from 512 pieces)

Debris & Dust

ControlDefault · rangeWhat it does, when to change it
Chips
Chips per crack30 – 100Small chips thrown out at each crack.
Chip size10 – 1,000,000 (scene units)Size of a chip.
Chip speed (m/s)1.50 – 100How fast chips fly.
Chip shapeRock (tetra)Rock, flat shard (glass), splinter (wood) or grain.
Chip size x (display)10.05 – 10Display size of chips.
Dust
Dust per crack40 – 100Dust particles per crack.
Dust size0.50 – 1,000,000 (scene units)Size of a dust particle.
Dust life (s)20.05 – 60How long dust lives.
Limits
Max particles20,0000 – 2,000,000Cap on chips + dust.
– Debris & Dust
Chips
Chips per crack3
Chip size1
Chip speed (m/s)1.5
Chip shapeRock (tetra)
Chip size x (display)1
Dust
Dust per crack4
Dust size0.5
Dust life (s)2
Limits
Max particles20,000

Cache & Display

ControlDefault · rangeWhat it does, when to change it
Cache
Cache file—Where the .vshc cache is written. Use File... in Tools.
Write the cache file when playback reaches the endoffWrites the cache automatically when playback reaches the end frame (licensed).
Display
Show chips and dustonShow chips and dust.
Chips material ID31 – 1000Material ID of the chips.
Dust material ID41 – 1000Material ID of the dust.
Shrink pieces (preview)00 – 0.5Preview: shrinks each piece slightly so the cracks show.
– Cache & Display
Cache
Cache file
Write the cache file when playback reaches the end
Display
Show chips and dust
Chips material ID3
Dust material ID4
Shrink pieces (preview)0

Licence and About

Licence: your Hardware ID and Copy, a box to paste the licence file, APPLY LICENCE, Load file..., Get a licence, and how many days of updates are left. When the licence year ends the installed build keeps working; only newer versions need a renewal. About / Help opens this guide.

04Presets and recipes

The first five come with the plugin (Tools → Start from). Apply one, then adjust. Values not listed stay at their defaults.

Glass pane hit by a ball

Pattern Glass, Pieces 300, Rings 8, Rings packed 1.8, Irregularity 0.25 · Glue 100 · Edges held by a frame on, ground hold off · Density 2500, Friction 0.3, Bounce 0.25 · Chips 2, Dust 1, Chip shape Flat shard.

A 2 cm pane, ball at 12 m/s: about 200 cracks, none further than 0.4 m from the hit; the frame keeps the edge shards.

Concrete column collapse

Pattern Clustered, Pieces 400, Clusters 10, Spread 0.1 · Glue 250 · ground hold on · Density 2400, Friction 0.7, Bounce 0.05 · Chips 4, Dust 8. For hanging steel add Rebar 8 MPa and Steel bars inside.

Brick or stone wall

Pattern Uniform, Pieces 600 · Glue 80 · ground hold on · Density 2000, Friction 0.7, Bounce 0.05 · Chips 3, Dust 6. Chunks Two levels, size 0.5 m, so it breaks into blocks first.

Wooden plank splinters

Pattern Wood, Pieces 150, Splinter length 8 · Glue 300 · edges held · Density 600, Friction 0.5, Bounce 0.3 · Chip shape Splinter.

Impact crater

Pattern Radial, Pieces 500, Radial focus 0.7, Impact helper at the hit · Glue 120 · Push at frame 10, Push speed 15 m/s, radius 2 m · Chips 4, Dust 8.

A city window blown in

Shatter on the whole Vanguard City object · City glass on (IDs 13,14), Pane 1 cm, 40 shards/m² · Impact helper at the façade, Push speed 12 m/s, radius 6 m. Only the windows inside the radius break.

A City tower: glass and façade broken by an impact, simulated on the GPU.

A storm through a street

Run Tornado, then in MAXScript shatterOps.setupCityParts $parts windFile:@"D:\shot\storm.vtw". Each detached City part is set up for what it is (glass, façade, roof, car, tree, pole, cloth); shatterOps.simulateMany runs them in one GPU scene. Wind drag 1, Break at 0.6 × peak, above 25 m/s; awnings become PhysX cloth.

A road broken by a heavy hit

A box 5 × 5 × 0.6 m · MPM instead of pieces on, Material Sand / soil, spacing 0.03 m, Cohesion 0.5, Stiffness 2000 kPa, Density 1800 · Top layer on: Asphalt, 0.08 m, strength 1, crack spacing 0.45 m, irregularity 0.85 · Soil breaks in lumps 0.6 · Show Surface. The asphalt takes material ID 1, the soil the Inside material ID.

Wet sand castle, snow, jelly

MPM instead of pieces on. Wet sand: spacing 0.04 m (preview) / 0.015 m (final), Cohesion 0.5, Friction 35°, Stiffness 350, Density 1700. Snow: 0.03 m, Stiffness 140, Density 400. Jelly: Soft body, Stiffness 40, Density 1000.

What is MPM?

MPM is the Material Point Method: a published way of simulating materials that are neither quite solid nor quite liquid — sand, soil, snow, mud, asphalt over earth, jelly. It was introduced by Sulsky and colleagues in 1994 for engineering, and became famous in visual effects when Disney used it for the snow in Frozen (Stomakhin et al., 2013). It is not any one program's: Houdini added its own MPM solver in version 20, and Vanguard Shatter has its own, inside 3ds Max.

How it works

The object is filled with particles. Each carries its mass, speed and how much it has been stretched or squeezed. Every substep they hand that to a 3D grid, the forces are worked out on the grid, and the result goes back to the particles. That is why sand can stand as a heap and still pour, and snow can pack and then break in clumps.

What Shatter uses

SolverMLS-MPM with APIC transfers (Hu et al. 2018), quadratic B-spline weights, CUDA on NVIDIA cards, the same arithmetic on the CPU
SnowStomakhin et al. 2013: packs, hardens, breaks in clumps
Sand, soilDrucker-Prager plasticity (Klár et al. 2016) with friction angle and cohesion
Asphalt, slabs, claybonded Drucker-Prager: each particle's cohesion softens as it is crushed, and it cracks open when stretched past its strength (Rankine); weak seams make it break in chunks
Soft bodiesfixed-corotated elasticity

Road over soil, measured

An 8 cm asphalt slab on 0.5 m of clayey soil, 2 × 2 m, hit by a 0.25 m steel ball at 8 m/s (298,000 particles, CUDA, 0.85 s a frame): the asphalt cracks radially from the hit into 13 separate plates, the soil under it gives way in lumps, and the same road with nothing hitting it stands for the whole test without a single crack.

A 5 × 5 m road, 8 cm asphalt on clayey soil, 557,780 particles, 45 frames in 55 s on the GPU: radial cracks, broken asphalt in them, whole plates between.
A ball buried in the soil bursts up through 8 cm of asphalt at 40 m/s² (1.1 million particles, 40 frames in 147 s, Show: Chunks and grains): the crater, the plates cracked round it, the lumps and grains thrown out.

Shatter or Houdini?

The method is the same family, built on the same papers. Houdini's solver is broader and made for very large shots; Shatter's is made for close, detailed shots of a few metres — a road, a wall, a sandcastle — inside 3ds Max, alongside its rigid fracture, Vanguard City, Tornado wind and Fluid water, and it simulates as you press Play.

05Rendering and export

Renderers

Shatter hands Max an ordinary mesh every frame, so Arnold, V-Ray, Corona, Redshift, Scanline and the Vanguard renderers all render it with no extra step. Network and cloud rendering need the cache (or a bake) so render nodes do not re-simulate.

Materials

Give the object a Multi/Sub-Object material:

ID 1the original surface (or the object's own IDs)
ID 2broken faces: rough concrete, raw wood, frosted glass edge
ID 3chips · also rebar bars
ID 4dust: small, grey, slightly transparent

All four IDs can be changed in Fracture → Interior, Rebar and Cache & Display. Broken faces get their own UVs (Inside UV tiling).

Typical settings

Motion blur on (shutter 0.5 frame). For glass, refraction depth 8 or more, and caustics off. Dust reads best with a little depth of field and backlight. Simulate at 30 fps and retime in post, or set the scene to 120–240 fps for real slow motion (the glass sample uses 240 fps).

Cache

The .vshc file stores every frame: piece positions, chips, dust and which glue broke. Save it before rendering a long shot or sending the scene to a farm; the scene finds it again on load. Tick Write the cache file when playback reaches the end to save it automatically.

Bake and export

Bake to keyframed meshes makes one Editable Mesh per piece with position/rotation keys. From there: Alembic (File → Export) for Houdini, Maya, Blender, Unreal; FBX for game engines. Bake a copy and keep the Shatter object hidden if you may want to re-simulate.

Sand, soft bodies, cloth

Set Show to Surface (render) or Surface from particles before rendering; Points and Particles are for the viewport. The PhysX soft body renders the original mesh with its UVs.

MPM: a jelly and a ball landing on a wet-sand block, rendered as surfaces.
PhysX cloth: a pinned flag and an awning in Tornado wind, a cloth over a ball.

06Troubleshooting and FAQ

I can't find Shatter in the Create panel.

It is a modifier: Modify → Modifier List → Vanguard Shatter.

Only 50 pieces, and Save cache / Bake say no.

No licence on this computer yet. See Activate on page 2. The Licence rollout says which.

The object falls apart by itself at frame 0.

Pieces hold until hit is off, the glue is 0, or Glue x is animated to 0. Turn the first on and raise Glue strength.

Nothing breaks when the ball hits it.

The ball must be in Impact objects, and moving: give it keys, not just a position. Lower the glue or speed the ball up. A Tornado object is not a collider — use its wind file with Wind....

Pieces fall through a bowl or a hollow object.

Set Collide as to Exact shape. Convex hull fills holes.

Small fast pieces pass through thin walls.

Raise Substeps (try 40) or Quality High.

The whole wall crumbles into identical pebbles.

Use Chunks (Two levels) and Roughness 0.4; lower the piece count.

It is slow.

Physics on: Auto uses the GPU from 512 pieces; force GPU on an NVIDIA card. Quality Fast while blocking out. For MPM, block out at Detail: Draft and switch to High or Very high for the final; each step is 4× the particles and about 6× the time. An NVIDIA card is 100× faster than the CPU for MPM.

The progress bar says “particles in system RAM – slow”.

They did not fit on the graphics card, so the card reads them from the computer's memory instead: it still finishes, 50–100× slower. Lower Detail one step, or close what else is using the card (browsers, screen recorders, another 3ds Max) — As many as the computer holds already sizes itself to what is free.

PhysX 5.6 engine, cloth or soft body is does not run.

They need an NVIDIA GPU with a current driver. Everything else runs on any PC, on the CPU.

Soft body faces cross each other.

Use Show: Surface from particles: it is built from the particles and cannot pass through itself.

A whole City street of cloth does not move.

Run it with simulateMany (one GPU scene). Cloth needs pins: City's VanguardClothPin, or selected vertices.

I changed a setting and the result vanished.

Fracture settings make a new cut, so the old simulation no longer fits. Press Play or SIMULATE. Display settings (colour, point size, Show) never throw a simulation away.

The cache will not load.

It belongs to a different cut (pieces, seed or pattern changed). Simulate again and save.

GPU results differ a little between runs.

Normal for a GPU solver. Use Physics on: CPU when you need two runs to match exactly, or cache the take you like.

Water and wind do nothing.

The .van / .vtw file must cover the simulated frames; check Wind frame offset and that the Fluid object is the one picked.

The installer says a file is in use.

Close every copy of 3ds Max, then run it again.

07Requirements and licence

Requirements

3ds Max2024, 2025, 2026, 2027 (64-bit, Windows 10/11)
GPUAny for rigid pieces (CPU fallback). NVIDIA with a current driver for GPU speed, MPM in the tens of millions of particles, the PhysX 5.6 soft body and grains, and cloth. On Intel or AMD graphics MPM runs on every CPU core: the same result, about 100× slower — keep Detail at Draft or Normal.
Memory16 GB; 32 GB for City-scale shots. MPM: about 300 bytes a particle on the graphics card (175 when it is short of room) and 13 bytes a particle a frame in system RAM. Shatter works out what yours holds before it starts and says so.
Works withVanguard City (glass, parts, structure), Vanguard Tornado (wind), Vanguard Fluid (water, buoyancy)

Measured speed

Unglued wallGPUCPU
1,000 pieces5 ms/frame26 ms
10,000 pieces21 ms/frame267 ms
2,000 City awnings (cloth)60 frames in 3.5 min, one GPU scene
MPM: 5 × 5 m road, buried ballRTX 3090
Normal, 2 million particles1.7 s a frame
High, 8 million12 s a frame
Very high, 32 million68 s a frame
68 million (as many as a 24 GB card holds)3.4 min a frame
0.5 million on the CPU (20 threads)51 s a frame

Licence

One licence, one computer. The licence file is issued for your computer's Hardware ID. Moving to a new PC: sign in at vanguardfx.pro and re-issue it for the new ID.

A licence includes a year of updates. When it ends, the version you have keeps working; renew to get newer releases.

Without a licence: up to 50 pieces per object, no cache export, no bake.

Support

support@vanguardfx.pro — send the version (About rollout), the Max version, your GPU, and the scene or a screenshot of the panel. Downloads, release notes and your licences: vanguardfx.pro.

What's new in 1.7.8

Locked down: no part of the engine is reachable without the licence. 1.7.4 added PhysX cloth, live simulation while the timeline plays, particle display (points, colour by speed), soft-body self-collision and Vanguard City part setup.

Vanguard Shatter 1.7.8 · vanguardfx.pro
Download Vanguard ShatterLicence & free trialSupportAll guides