Run VanguardWeather_Setup_1.5.1.exe (right-click → Run as administrator). It installs the plugin into every 3ds Max it finds from 2024 to 2027. Close 3ds Max before installing — a running Max keeps the old plugin file locked.
Without a licence the plugin runs in a limited mode: falling snow, rain or sand is capped at 2,000 particles. Everything you set up is kept and runs in full as soon as the licence is applied.
| Place | What you find |
|---|---|
| Utilities → Vanguard Weather | Presets, “MAKE WEATHER”, Weather Material, paint brush, bake, licence. Start here. |
| Create → Geometry → VanguardFX → Vanguard Weather | The falling volume (snow / rain / sand) — drag a box in a viewport. It shows the Vanguard sheep badge; click anywhere on the badge to select it. |
| Modifier list → Vanguard Snow | The world-space modifier that builds real snow / sand geometry on an object. |
| Material Editor → Maps → Weather Map | Wetness, puddles, rain ripples, drops on glass and snow sparkle as a texture. |
| Customize → Toolbars → VanguardFX → Weather | A toolbar button that opens the utility. |
Presets are in centimetres and converted to your scene units. After applying, every value below can be changed on the objects themselves.
| Preset | Snow depth | Coverage | Particles / m² | Fall speed | Wind | Use it for |
|---|---|---|---|---|---|---|
| Light dusting | 1.5 cm | 0.55 | 1.5 | 80 cm/s | 20 cm/s | First snow, roofs white and ground showing. |
| Heavy snow | 14 cm | 1.0 | 5 | 100 cm/s | 30 cm/s | Deep rounded snow on everything facing up. |
| Blizzard | 20 cm, drift 0.7 | 1.0 | 12 | 150 cm/s | 900 cm/s | Drifts behind walls, sideways snow. |
| Winter night | 10 cm, overhang | 1.0 | 25 | 80 cm/s | 60 cm/s | Snow on every ledge and rail, wet glossy street, lamps glowing in falling snow. |
| Drizzle | — | wet 0.45 | 3 | 500 cm/s | 50 cm/s | Damp, darkened surfaces, a few puddles. |
| Storm | — | wet 1.0, puddles 0.35 | 10 | 900 cm/s | 500 cm/s | Soaked city, rain rings in puddles, drops on glass. |
| Sandstorm | sand layer | — | 20 | 120 cm/s | 1500 cm/s | Sand on ledges, brown haze, grains racing sideways. |
Apply Winter night. Put an omni or photometric light at each lamp head. On the Weather volume set Fog 6 /km, fog colour dark blue-grey (40,48,62), Lamp glow 1.5, Glow size 300 cm, Drops lit by lamps 1.5. The snow lights up around each lamp and fades into the dark.
Apply Storm, then in the volume’s Tornado wind rollout pick your Vanguard Tornado. Influence 1.0, Carried for 3 s, Reach 300 m. Drops near the funnel are swept round it; far away the rain is untouched.
Select the volume and open the Modify panel. Rollouts from top to bottom.
| Control | Range · default | What it does |
|---|---|---|
| Falling | Snow / Rain / Sand · Snow | What falls. Changes shape (flakes, streaks, grains) and defaults. |
| Count | 0–10M · 20,000 | Particles in the volume at render time. Raise for denser weather; the GPU handles millions. |
| Seed | · 1 | A different random pattern with the same settings. |
| Width / Length / Height | · 1000 / 1000 / 500 | Size of the box particles fall in. Cover only what the camera sees. |
| Viewport % | 0–100 · 20 | Share of the particles drawn in the viewport. |
| Viewport max | · 100,000 | Hard cap for the viewport, keeps it fluid. |
| Control | Range · default | What it does |
|---|---|---|
| Fall speed | · 100 /s | Snow 50–150 cm/s, rain 500–900 cm/s. |
| Speed random | 0–1 · 0.3 | Each particle’s speed varies by this share. |
| Blows toward | −360–360° · 0 | Wind direction in the top view. |
| Wind speed | · 0 /s | Sideways speed; slants rain, drives a blizzard. |
| Gusts | 0–2 · 0.3 | How much the wind varies over time. |
| Sway / Sway frequency | · 20 / 0.5 Hz | The wobble of falling flakes. Lower for rain. |
| Control | Range · default | What it does |
|---|---|---|
| Size / Size random | · 0.6 / 0.5 | Flake or drop size and its variation. |
| Flakes tumble | on | Flakes rotate as they fall (geometry mode). |
| Material ID | · 1 | ID given to the particle mesh. |
| Streak | 0–1 s · 0.03 | Length of a rain streak as seconds of motion. |
| Streak width | · 0.06 | Thickness of the streaks. |
| Control | Range · default | What it does |
|---|---|---|
| Render as | GPU splats · Geometry | GPU splats: drawn over the finished image in a fraction of a second. Geometry: real triangles that any renderer renders (slower, but in reflections). |
| Colour / Opacity / Brightness | · white / 0.8 / 1.0 | How the splats look. Sand ≈ (205,165,115). |
| Snow motion smear | 0–1 s · 0 | Motion blur for snow and sand. |
| Hidden behind scene objects | on | Particles behind a wall are not drawn. Keep on. |
| Control | Range · default | What it does |
|---|---|---|
| Stop at the scene | on | Drops end on roofs, cars and the ground instead of passing through. |
| Splash height / Splashes | · 4 / 1.0 | Crowns, rings and beads where rain lands. |
| Run-off from edges | 0–20 · 1.0 | Water pouring and dripping off every lower edge — eaves, car roofs, lamps. Found automatically. |
| Fog | 0–50 /km · 0 | Haze density. 2–6 for a misty street, 10+ for a sandstorm. |
| Fog colour / Sky distance | · grey / 2 km | Haze tint; how far the empty sky counts. |
| Lamp glow in the haze | 0–50 · 1.0 | Scene lights glow through the fog. |
| Glow size | · 300 | Radius of each glow. |
| Drops lit by lamps | 0–50 · 1.0 | Rain and snow near a lamp light up. |
| Control | Range · default | What it does |
|---|---|---|
| Tornado / wind file | node or .vtw | A Vanguard Tornado in the scene, or its exported wind file. |
| Influence | 0–5 · 1.0 | How strongly the funnel moves the particles. |
| Carried for | 0.1–30 s · 3 | How long a particle is carried by the wind. |
| Reach from the funnel | · 300 m | Beyond this distance the tornado has no effect. |
Add to the last render puts the weather over the image in the frame buffer. Render this frame alone… and Over a sequence… write images to disk. Snow / wet / sand on everything inside this volume covers every object in the box. The status line shows what the last render did.
| Control | Range · default | What it does |
|---|---|---|
| Snow on · Depth | · 10 | Thickness of the layer on flat ground. |
| Steepest slope / Thins over | 0–89° · 55 / 20 | Steeper faces get no snow; the layer thins over this many degrees. |
| Coverage · Patch size · Seed | 0–1 · 1.0 / 80 | Below 1 the snow breaks into patches of this size. |
| Street level coverage / band | 0–1 · 1.0 / 40 | Snow amount on the lowest surfaces (streets) and their height band. |
| Rounded lip · Soften · Overhang | · 6 / 2 / 0 | Rounded snow edges, smoothing passes, a cornice jutting over edges. |
| Bumps · Bump size | 0–2 · 0.25 / 50 | Unevenness of the surface. |
| Detail · Max triangles · Viewport | · 3 / 500k | Edge length of the snow mesh; cap; coarser viewport preview. |
| Shelter from · strength · rays · spread · distance | Whole scene · 1.0 · 24 · 25° | What blocks snow from the sky (no snow under roofs and trees). Use the GPU gives the same result faster. |
| Wind: Blows toward · Drift · Lee reach | · 0° / 0 / 300 | Moves snow into drifts behind walls, off windward faces. |
| Regions · Inside · Soft edge · Strength | objects · No snow | Any objects as gizmos: no snow / snow only here / full snow inside them. |
| Use painted colour · Map channel | off · 0 | White vertex paint = snow (see the Paint brush). |
| Result · Snow material ID · No snow on IDs | Object + snow · 2 | Keep the object or output snow only; IDs for the snow and IDs to skip. |
| Closed solid · UV tile size | on · 100 | A closed shell (for SSS) and UV mapping for textures. |
Buttons: Update shelter (after moving objects), Snow material, Paint snow / wetness (brush)….
| Control | Default | What it does |
|---|---|---|
| Output | Wetness | Wetness mask, Puddles mask, Rain ripples (bump), Drops on glass (bump), Snow sparkle. |
| Wetness · Upward faces · Dry patches · Patch size · Under cover stays dry | 1 · 0.7 · 0.3 · 100 · on | Where surfaces are wet. |
| Puddle cover · size · edge · only flatter than | 0.3 · 200 · 0.1 · 0.97 | Puddles on flat ground only. |
| Ring spacing · Drops per second · Ring strength | 30 · 1 · 1 | Animated rain rings in puddles. |
| Drop size · Run speed · Drops | 0.4 · 8 · 1 | Drops sliding down glass. |
| Sparkle amount · size | 0.04 · 0.25 | Glints in snow. |
Weather Material puts a cover — Snow, Sand, Dust, Moss, Mud, Wet, or any material of your own with maps and displacement — on the selected objects. Amount, Only on upward faces, Patches, Patch size decide where; Follow the paint brush uses your painting; Displacement gives the cover real height. Paint (brush) opens a vertex-paint brush with size, strength and falloff: paint white where you want snow, wetness or sand, black where you don’t. Bake snow to a mesh freezes the result for export.
| Part | Renders in | How |
|---|---|---|
| Snow / sand on objects | Any renderer (Corona, V-Ray, Arnold, Scanline, Vanguard Render) | Real geometry from the Vanguard Snow modifier. Nothing to tick. |
| Wetness, puddles, ripples | Any renderer | Weather Map inside the wrapped materials. Corona and V-Ray Multi/Sub materials are handled per sub-material. |
| Falling snow / rain / sand | GPU splats over any image | Render your frame, then Add to the last render — or Over a sequence… for an animation, pointing at your rendered frames. |
| Falling, in reflections | Any renderer | Set Render as → Geometry. Slower; use moderate counts. |
| Vanguard Render | Native | Reads the weather directly; lamps, fog and wet streets included. |
Still at 1920×1080: count 200k–2M, splats, collisions on, fog 2–6. Animation: same seed for every frame; render the beauty pass first, then Over a sequence with the same frame range. For a camera that moves through rain, keep the volume just around the camera’s view — particles outside the frame cost time but add nothing.
Export: Bake snow to a mesh turns the snow into an Editable Mesh you can export to FBX/OBJ or send to another app.
| Problem | What to do |
|---|---|
| Snow is under a roof or missing from a roof | Press Update shelter after you move or add objects. Check Shelter from is Whole scene. |
| Snow is lumpy or slow on a huge scene | Raise Detail (a bigger edge length) and keep Viewport on Coarser. Winter night picks the detail per object for you. |
| Falling rain doesn’t show in the render | In splat mode it is added after the render: press Add to the last render. To have it inside the renderer, set Render as → Geometry. |
| Rain passes through roofs / no splashes | Tick Stop at the scene. Rain only collides with objects inside or near the volume. |
| Materials turned white after applying | Use Remove to restore the originals, then apply again; Multi/Sub materials are wrapped per sub-material. |
| Only 2,000 falling particles | No licence is active: see Getting started → Activate. |
| The viewport is slow | Lower Viewport % or Viewport max; the render is not affected. |
| The volume is hard to select | Click anywhere on the sheep badge with the name; the whole badge is selectable. |
| The installer says files are in use | Close every 3ds Max and run the installer again as administrator. |
Does everything inside the volume get weather? Yes — press Snow / wet / sand on everything inside this volume, or choose Apply to: Inside the weather volumes.
Can I animate it? Yes. All values are animatable; falling particles are the same for the same seed and frame, so network rendering matches.
Is it a particle simulation? No caching is needed: every frame is computed directly, so you can scrub to any frame.
Do I need the GPU? Falling-weather splats and fast shelter use an NVIDIA GPU. Snow geometry and maps work without one.
| 3ds Max | 2024, 2025, 2026, 2027 (64-bit, Windows 10/11) |
| GPU | NVIDIA with CUDA, for the falling weather and GPU shelter |
| Renderers | Corona, V-Ray, Arnold, Scanline, Vanguard Render |
| Licence | One licence, one computer (bound to its Hardware ID). Moving to a new computer: contact support. |
| Support | support@vanguardfx.pro · vanguardfx.pro |